Rockwell-automation 1414-CLMxxxxx_CLNxxxxx Low-limit Temperature Switc User Manual download pdf

Publication 1414-IN009A-EN-P - October 2005

Installation Instructions

Low-limit Temperature Switch

Catalog Number(s) 1414-CLM20AHDAB,

1414-CLN20AHDAB

Install the Low-limit Temperature Switch

The switch can be mounted in any position. Avoid locations subject to excessive

vibration. On manual reset model, position control to permit convenient access to

the reset button . Use three mounting holes in rear of case for flush mounting to

duct or other flat surface. Install capillary element in horizontal serpentine pattern

across duct on downstream side of the coil so it is exposed to areas where low

temperatures will occur. Do not kink or apply excessive force to the capillary

element. Fasten capillary at sufficient points to prevent damage from air movement

or vibration.

1 2 3 4

Summary of Contents

Page 1 - Low-limit Temperature Switch

Publication 1414-IN009A-EN-P - October 2005Installation InstructionsLow-limit Temperature SwitchCatalog Number(s) 1414-CLM20AHDAB, 1414-CLN20AHDABInst

Page 2 - Important User Information

2 Low-limit Temperature SwitchPublication 1414-IN009A-EN-P - October 2005Important User InformationSolid state equipment has operational character

Page 3 - Manual Reset Models

Low-limit Temperature Switch 3Publication 1414-IN009A-EN-P - October 2005Wire and Connect the Low-limit Temperature SwitchAll wiring should comply

Page 4 - Specifications

Publication 1414-IN009A-EN-P - October 2005 PN 40055-239-01(1)Supersedes Publication XXXX-X.X.X - Month Year Copyright © 2005 Rockwell Automation, I

Comments to this Manuals

No comments