Rockwell-automation 1414-IFZ35FGDAA Air Flow Transmitter User Manual

Browse online or download User Manual for Equipment Rockwell-automation 1414-IFZ35FGDAA Air Flow Transmitter. Rockwell Automation 1414-IFZ35FGDAA Air Flow Transmitter User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Publication 1414-IN001A-EN-P - October 2005
Installation Instructions
Air Flow Transmitter
Catalog Number 1414-IFZ35FGDAA
Before you Install
In order for the transmitter to operate correctly all the information supplied in this
document must be followed.
About the Air Flow Transmitter
The Air Flow Transmitter is an airflow transducer which may be used for control,
monitoring and regulation of airflow speed in fresh air and ventilation units etc.
The transmitter registers airflow speed according to a thermal principle based on
the fact that the cooling action of air increases with airspeed. The action is
measured and converted to a 4 to 20 ma or a 0 to 10V signal corresponding to
airflow speeds from 0.5 to 8 m/s (100 to 1575 ft/min) or 0.5 to 16 m/s (100 to 3150
ft/min).
The micro-processor based electronics provides an output signal that is linear and
corrected for temperature changes. If a standard analog instrument is connected the
airflow speed and temperature can be read remotely.
The transmitter has a separate 0 to 10 Vdc output signal for measurement of the air
temperature 0 to 50ºC (32 to 122°F).
IMPORTANT
Transmitter must not be mounted near elbows , damper vanes or
other restrictions that may cause turbulent air flow. Always install
in a straight section of duct.
Page view 0
1 2 3 4

Summary of Contents

Page 1 - Air Flow Transmitter

Publication 1414-IN001A-EN-P - October 2005Installation InstructionsAir Flow TransmitterCatalog Number 1414-IFZ35FGDAABefore you InstallIn order for t

Page 2 - Important User Information

2 Air Flow TransmitterPublication 1414-IN001A-EN-P - October 2005Important User InformationSolid state equipment has operational characteristics d

Page 3 - Install Air Flow Transmitter

Air Flow Transmitter 3Publication 1414-IN001A-EN-P - October 2005Install Air Flow TransmitterThe transmitter is mounted in such a way that the air

Page 4 - Specifications

Publication 1414-IN001A-EN-P - October 2005 PN 40055-231-01(1)Supersedes Publication XXXX-X.X.X - Month Year Copyright © 2005 Rockwell Automation, In

Comments to this Manuals

No comments