Rockwell-automation 1441-DYN25-MBAL Balancing Extension Module for the User Manual download pdf (Page 61)

Rockwell Automation Publication 1441-UM004A-EN-P - May 2011 61

Balancing Extension Module Chapter 2

Saving, Loading, and

Reviewing Balance

Measurements

With the Dynamix 2500 data collector you can save, load (recall), and review the

balance measurements you have taken.

Save a Balance Measurement

The Balancing application lets you save your balance measurements for quick and

easy rebalancing of the same machine at future dates, or to review past balancing

data. The measurement settings and run data are stored with a filename for later

retrieval.

You can save your balancing measurement at any time from the Balance Setup

screen, or from the Correction and Trim Weight Solution screens. Only screens

that have been accessed during the measurement are saved.

Follow these steps to save your balancing measurement.

1. From any screen on which it is available, press F3 (Save).

The Balance - Save Setup screen displays the names and dates of all

previously saved balance measurements.

2. Select the –save reading as- line and press F3 (Save) to display the Save As

dialog box.

The current date timestamp is the default filename. Alternatively, you can

highlight an existing filename to overwrite the existing measurement with

the current measurement.

3. Modify the file name as necessary and press OK.

You are returned to the Balance – Save Setup screen, which displays the

new measurement’s filename and date.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 67 68

No comments

Rockwell-automation 1441-DYN25-MBAL Balancing Extension Module for the User Manual Page 61