Rockwell-automation 1786-RPFRXL ControlNet Fiber Ring Modules Installa User Manual download pdf (Page 14)

14 ControlNet Fiber-optic Ring Repeater Modules

Rockwell Automation Publication 1786-IN003D-EN-P - April 2011

6. Remove the protective backplane cap as shown on page 18.

7. Once the modules are attached to the DIN rail, slide them together to

mate the repeater adapter with the repeater module.

WARNING: Removal and insertion under power (RIUP) is not

supported. These modules must be powered down while

connecting and disconnecting them from any interconnected

modules.

If you insert or remove the module while backplane power is on, an

electrical arc can occur. This could cause an explosion in hazardous

location installations.

Be sure that power is removed or the area is nonhazardous before

proceeding.

WARNING: When you connect or disconnect the removable

terminal block (RTB) with field side power applied, an electrical arc

can occur. This could cause an explosion in hazardous location

installations.

Be sure that power is removed or the area is nonhazardous before

proceeding.

42632

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

No comments

Rockwell-automation 1786-RPFRXL ControlNet Fiber Ring Modules Installa User Manual Page 14