Rockwell-automation 1786-RPFRXL ControlNet Fiber Ring Modules Installa User Manual download pdf (Page 27)

ControlNet Fiber-optic Ring Repeater Modules 27

Rockwell Automation Publication 1786-IN003D-EN-P - April 2011

2. Connect the receive port (RX) and transmit port (TX) at the

starting module.

3. Do the following to attach the cable connector to the module connector.

a. Align the key of the cable connector with the slot in the module

connector, and insert the connector into the RX port.

b. Push and twist the locking cap until the bayonet lug is locked into

place.

4. At the second module, connect the cables in reverse.

For example, tracer to TX port on module 1, non-tracer to RX port on

module 1: tracer to RX port on module 2, non-tracer to TX port

on module 2.

ATTENTION: Under certain conditions, viewing the optical port

may expose the eye to hazard. When viewed under some

conditions, the optical port may expose the eye beyond the

maximum permissible exposure recommendations.

42550

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

No comments

Rockwell-automation 1786-RPFRXL ControlNet Fiber Ring Modules Installa User Manual Page 27