Rockwell-automation 1792D-CB18JP ArmorBlock MaXum I/O Cable Bases Devi User Manual download pdf (Page 11)

ArmorBlock MaXum I/O Cable Bases DeviceNet Powered Outputs Series B 11

Publication 1792D-IN001B-EN-P - September 2000

Hazardous Location Approval

The following information applies only to products marked

with Hazardous Location Approval, when operating in

hazardous locations:

Products marked “CL I, DIV 2, GP A, B, C, D” are suitable for use in

Class I Division 2 Groups A, B, C, D, Hazardous Locations and

nonhazardous locations only. Each product is supplied with markings

on the rating nameplate indicating the hazardous location

temperature code. When combining products within a system, the

most adverse temperature code (lowest “T” number) may be used to

help determine the overall temperature code of the system.

Combinations of equipment in your system are subject to

investigation by the local Authority Having Jurisdiction at the time of

installation.

WARNING

EXPLOSION HAZARD -

• Do not disconnect equipment unless power

has been removed or the area is known to be

nonhazardous.

• Do not disconnect connections to this

equipment unless power has been removed

or the area is known to be nonhazardous.

Secure any external connections that mate to

this equipment by using screws, sliding

latches, threaded connectors, or other means

provided with this product.

• Substitution of components may impair

suitability for Class I, Division 2.

• If this product contains batteries, they must

only be changed in an area known to be

nonhazardous.

WARNING

Use supply wires suitable for 30°C above

surrounding ambient.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

No comments

Rockwell-automation 1792D-CB18JP ArmorBlock MaXum I/O Cable Bases Devi User Manual Page 11