Rockwell-automation 20D PowerFlex 700S and 700H Frame 10...12 Rectifie User Manual download pdf (Page 11)

Publication PFLEX-IN023A-EN-P

5. Remove the bolts that secure the power structure to the drive enclosure (see

Figure 3

below for frame 10 and 12 and Figure 4 on page 12 for frame 11).

6. Follow the instructions in the PowerFlex 700S and 700H High Power

Maintenance Stand, Installation Instructions, publication PFLEX-IN014, to

assemble the maintenance stand.

Note: The maintenance stand is designed for removing power structures from

drives supplied in Rittal TS8 enclosures only. An alternate means of removal

is necessary for other types of enclosures.

7. Remove the power structure by sliding it onto the rails of the maintenance

stand.

Important: Do not

pull on any of the cables, terminals or circuit board

mounts when removing the power structure from the

enclosure.

Figure 3 Frame 10 and 12 Drives

Remove bolts

Frame 10 power

structure shown

Remove bolts

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 49 50

No comments

Rockwell-automation 20D PowerFlex 700S and 700H Frame 10...12 Rectifie User Manual Page 11