Publication 20P-IN056A-EN-PPowerFlex® DC DriveFrame D Field Dual Diode ModuleInstallation InstructionsWhat This Kit Includes• Field dual diode module•
Publication 20P-IN056A-EN-P2What You Need to DoTo install the field dual diode module:❐ Step 1: Remove power from the drive❐ Step 2: Remove the protec
3Publication 20P-IN056A-EN-PImportant:A communication cable connects the HIM assembly to the Control board mounted on the control pan. Therefore, the
Publication 20P-IN056A-EN-P44. Disconnect the HIM communication cable from the connector on the upper right corner of the Control board and remove the
5Publication 20P-IN056A-EN-PImportant: Mark all connections and wires before removal to avoid incorrect wiring during reassembly.2. Disconnect the cab
Publication 20P-IN056A-EN-P6Step 4: Remove the Existing Field Dual Diode ModuleRemove the two screws and washers that secure the dual diode module to
7Publication 20P-IN056A-EN-PStep 7: Replace the Protective Covers and Document the Change1. Replace the protective covers in the reverse order of remo
Publication 20P-IN056A-EN-P - May 2010Copyright © 2010 Rockwell Automation. All rights reserved. Printed in USA.www.rockwellautomation.comAmericas: Ro
Comments to this Manuals