Rockwell-automation 2100 CENTERLINE Motor Control Center (MCC) Units w User Manual download pdf (Page 3)

Rockwell Automation Publication 2100-IN014F-EN-P - March 2014 3

CENTERLINE 2100 Motor Control Center (MCC) Units with Vertical Operating Handles

Before You Begin

Follow this procedure before you begin installing your unit.

1. Remove all packaging material from the unit.

2. Read the unit installation instructions.

3. Familiarize yourself with the unit.

4. Inspect unit for shipping damage.

5. For SecureConnect™ units, verify that power stabs fully extend and retract.

ATTENTION: When installing units for CENTERLINE 2100 Motor Control Centers

with ArcShield™ baffles, you must make sure you are installing a unit that has

the same arc resistance rating as the MCC in which it is being installed. Units

that are not rated for 100 ms arc duration must not be installed in a section that

is rated for 100 ms arc duration. The arc resistant rating will not apply if that is

done.

ATTENTION: SecureConnect units must be installed in Series P or later

CENTERLINE 2100 Motor Control Centers. If installing a SecureConnect unit in a

Series N or earlier MCC, you must have compatible bus covers installed. For more

information, contact your local Allen-Bradley® distributor or Rockwell

Automation sales representative.

Unit

Unit Door

Unit Support Pan

1 2 3 4 5 6 7 8 ... 15 16

No comments

Rockwell-automation 2100 CENTERLINE Motor Control Center (MCC) Units w User Manual Page 3