Rockwell-automation 2500 CENTERLINE Motor Control Centers IP54 Sealing User Manual Page 1

Browse online or download User Manual for Equipment Rockwell-automation 2500 CENTERLINE Motor Control Centers IP54 Sealing. Rockwell Automation 2500 CENTERLINE Motor Control Centers IP54 Sealing Instructions User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
1 Publication 2500-IN003A-EN-P—August 2007
Instructions
CENTERLINE
®
2500 Motor Control Centers
IP54 Sealing Instructions
For IP54 structures only
Procedure
1. Remove the tube of caulking (mastic) sealer from the splice kit. Cut the
nozzle at the first notch, 3 mm (1/8”) from the end.
2. Read the application directions on the tube. Apply a continuous bead of
caulking, 3 mm (1/8”) wide, around the outside edge of the sideplate of
the fixed motor control center.
See Figure 1.
Figure 1 Correct Application of Caulking
Apply 3 mm (1/8”) wide
continuous bead of
caulking sealer. Do not
allow “skin” to form on
caulking before joining
the sections.
Page view 0
1 2

Summary of Contents

Page 1 - IP54 Sealing Instructions

1 Publication 2500-IN003A-EN-P—August 2007InstructionsCENTERLINE® 2500 Motor Control Centers IP54 Sealing InstructionsFor IP54 structures onlyProcedur

Page 2 - Rockwell Automation, Inc

Publication 2500-IN003A-EN-P—August 2007 2Supersedes Publication 2100-IN049A-EN-P - May 2001 Copyright © 2007 Rockwell Automation, Inc. All rights res

Comments to this Manuals

No comments