Rockwell-automation Allen-Bradley Plot Software User Manual User Manual download pdf (Page 19)

INSTALLATION 19

5. Install a pen in the lower left penholder of the plotter. Install the

appropriate marker card in the respective plate location.

Hint: You can avoid wasting marker cards during this calibration by

taping a clear transparency over the entire marker card.

6. Next, select the "File" menu,

then "Plot..." or press the

button on the toolbar ; the

Plot window then appears

(make sure that the Plotter is

switched on and loaded with

the appropriate Marker Card).

Figure 26 The Plot Window

7. Click on the "Settings..."

button; the settings for the

default plotter window will

open, at which point you may

set various plotter settings.

Note: Refer to Figure 27 The

Plotter Settings Window

(Parallel Port Connection) if

you connected using a parallel

port.

Refer to Figure 28 The Plotter

Settings Window for Default

Plotter (USB Connection) if

you connected using a USB

port.

Figure 27 The Plotter Settings Window (Parallel Port Connection)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 45 46

No comments

Rockwell-automation Allen-Bradley Plot Software User Manual User Manual Page 19