WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Follow NFPA 70E requirements. Install in suitable enclosure. Keep free from contaminants.
Installation, adjustments, putting into service, use, assembly, disassembly, and maintenance shall be carried out by suitably trained personnel in accordance with applicable code of practice. In case of
malfunction or damage, no attempts at repair should be made. The product should be returned to the manufacturer for repair. Do not dismantle the product.
Features
Installation
Installation Instructions
CEP9 Operator Stations
(Cat CEP9-EOS-SCS; CEP9-EOS-SDS)
Start Forward / Speed 1
Start Reverse / Speed 2
Local / Remote
Stop
Reset
Start Forward / Speed 1
Start Reverse / Speed 2
Local / Remote
Stop
Up
Down
Reset
Escape
Power LED
Trip / Warn LED
Power LED
Trip / Warn LED
Enter
Select
2
1
1
2
3
1.7 N
.
m
(15 lb-in)
0
RESET
LOC AL
REMOTE
0
RESET
SELECT
ESC
REMOTE
LOC AL
0
RESET
SELECT
ESC
REMOTE
LOC AL
800F-AW2
Additional Resources:
Go to http://www.sprecherschuh.com/library/literature/
Click
1
2
CEP9-EOS-SCS CEP9-EOS-SDS (Requires control module rmware v3.000 of higher)
For use on a at surface of a Type 4X Enclosure
Comments to this Manuals