Rockwell Automation 1784-KTXD User Manual download pdf (Page 18)

2-2 Configuring the PKTx Hardware

1784-6.5.27 - September 1997

Figure 2-1 Overview of the jumpers on the PKT

card

Base Memory Address Restriction

Although the assignment of the IRQ and base memory address values is

automatic, and does not require user intervention, there is one jumper on

the PKTx card that is used to restrict the range of values that can be assigned

to the base memory address by the PCI BIOS. This jumper is called Base

Memory Address jumper, and it must be set before you install the PKTx

card inside your computer.

The PKTx Utilities diskette contains a program (PKTXD.EXE)

which allows you to view which base memory address was chosen

by the system. Refer to page A-2 for more information.

The Base Memory

Jumper (JP2)

Card ID Jumper

(JP3)

40021

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 62 63

No comments

Rockwell Automation 1784-KTXD User Manual Page 18