Rockwell Automation 1785 PLC-5 User Manual download pdf (Page 20)

1785-6.5.19 November 1998

2-4 Installing the Interface Module

Preventing Electrostatic

Discharge (ESD) Damage

The Ethernet interface module is shipped in a static-shielded

container to guard against electrostatic discharge (ESD).

ESD can damage integrated circuits or semiconductors in the module

if you touch the backplane connector pins. Avoid electrostatic

damage by observing the following precautions:

• Remain in contact with an approved ground point while handling

the module (by wearing a properly grounded wrist strap).

• Do not touch the backplane connector or connector pins.

• When not in use, keep the module in its static-shielded container.

Complying with European Union

Directives

If this product has the CE mark it is approved for installation within

the European Community or EEA regions. It has been designed and

tested to meet the following directives.

EMC Directive

This product is tested to meet Council Directive 89/336/EC

Electromagnetic Compatibility (EMC) and the following standards,

in whole or in part, documented in a technical construction file:

• EN 50081-2

EMC - Generic Emission Standard, Part 2 - Industrial

Environment

• EN 50082-2

EMC - Generic Immunity Standard, Part 2 - Industrial

Environment

This product is intended for use in an industrial environment.

Low Voltage Directive

This product is tested to meet Council Directive 73/23/EEC Low

Voltage, by applying the safety requirements of EN 61131-2

Programmable Controllers, Part 2 - Equipment Requirements and

Tests. For specific information required by EN 61131-2, see the

appropriate sections in this publication, as well as the Industrial

Automation Wiring and Grounding Guidelines for Noise Immunity,

publication 1770-4.1.

This equipment is classified as open equipment and must be mounted

in an enclosure during operation to provide safety protection.

Wrist strap

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 53 54

No comments

Rockwell Automation 1785 PLC-5 User Manual Page 20