Rockwell-automation 1746-NI8 SLC 500 Analog Input Module Instructions User Manual download pdf (Page 10)

SLC 500™ Analog Input Module

Publication 1746-IN006A-US-P

Terminal Wiring

The 1746-NI8 module contains an 18-position, removable terminal block. The

terminal pin-out is shown below.

erminal Block

ATTENTION

Disconnect power to the SLC before attempting to install,

remove, or wire the removable terminal wiring block.

To avoid cracking the removable terminal block, alternate the

removal of the slotted terminal block release screws.

Shield

Channel 0 (-)

Channel 1 (-)

Channel 2 (-)

Channel 3 (-)

Channel 4 (-)

Channel 5 (-)

Channel 6 (-)

Channel 7 (-)

Channel 0 (+)

Channel 1 (+)

Channel 2 (+)

Channel 3 (+)

Channel 4 (+)

Channel 5 (+)

Channel 6 (+)

Channel 7 (+)

Shield

(Terminal Block Spare Part Catalog Number 1746-RT25G)

Terminal Block Release Screw

Maximum Torque=0.7 to 0.9 Nm

(6 to 8 in-lbs.)

@JO"VTQQE@JO"VTQQE ".".

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

No comments

Rockwell-automation 1746-NI8 SLC 500 Analog Input Module Instructions User Manual Page 10