Rockwell-automation 1756-LSP GuardLogix Controller User Manual download pdf (Page 6)

6 GuardLogix Controllers

Publication 1756-IN045E-EN-P - October 2009

Install a CompactFlash Card

1. Turn the keyswitch to the PROG position.

2. Open the door of the controller.

3. Push the CompactFlash latch to the left.

4. Insert the CompactFlash card with the A-B logo pointing left.

5. Release the latch and make sure it slides over the CompactFlash card.

WARNING

When you insert or remove the CompactFlash card an electrical arc can occur.

This could cause an explosion in hazardous location installations. Be sure that

power is removed or the area is nonhazardous before proceeding.

ATTENTION

If you are not sure of the contents of the CompactFlash card, before you install

the card, turn the keyswitch of the controller to the PROG position. Depending

on the contents of the card, a power cycle or fault could cause the card to load

a different project or operating system into the controller.

RS232

BATTERY

PORT

1-D

2-R

-D

3-T

5-G

-6

-8

-7

-9

BATTERY

DATE

COMPACT

FLASH

Insert 1

To Eject

1 + 2

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Rockwell-automation 1756-LSP GuardLogix Controller User Manual Page 6