Rockwell-automation 20P PowerFlex DC Drive Communication Interface Cab User Manual download pdf (Page 3)

PowerFlex® DC Drive Communication Interface Cable 3

3. Remove the top protective cover from the drive:

a. For frame A drives, press in on the sides at the bottom edge of the

cover and at the same time pull the cover toward you to pull it

partially off the drive chassis. Next, at the top of the drive, pull the

cover forward, away from the drive, until the pins fit in the keyhole in

the top of the cover, then carefully lift the cover off of the drive

chassis.

Important:The HIM assembly is connected via the Communication

Interface cable to the Control board and therefore will not

pull free from the drive until disconnected. See page 5

for

instructions.

Frame A

When metal pin fits in keyhole,

lift cover off drive chassis.

1 2 3 4 5 6

No comments

Rockwell-automation 20P PowerFlex DC Drive Communication Interface Cab User Manual Page 3