Rockwell-automation 2705 RediSTATION Operator Interface User Manual User Manual download pdf (Page 40)

Publication 2705-UM001A-EN-P

5-4 Building a Custom RediSTATION

Every 2 consecutive pins on the I/O connector connects to an I/O

cable connector. The I/O connector supports 2 outputs/4 inputs.

To simplify wiring, input devices and output devices attach to

opposite ends of the I/O connector. The following table defines pin

functions on the I/O connector. Output devices connect to pin 1-2

and 3-4. Input devices connect to pins 5-6, 7-8, 9-10 and 11-12.

Unused pins are left open.

I/O Connector Pin # Pin Label Function

1 OUT1+ Connects Output Device

2 OUT1-

3 OUT2+ Connects Output Device

4 OUT2-

5 IN4+ Connects Input Device

6IN4-

7 IN3+ Connects Input Device

8IN3-

9 IN2+ Connects Input Device

10 IN2-

11 IN1+ Connects Input Device

12 IN1-

I/O Cable (up to 6)

I/O Connector

To Output (Pilot Light)

To Input (Contact)

Circuit

Board

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 63 64

No comments

Rockwell-automation 2705 RediSTATION Operator Interface User Manual User Manual Page 40