Rockwell-automation 1494V-DS400_DSX400 - Series D Variable Depth 400A User Manual download pdf

Product Information

Bulletin 1494V Variable Depth 400A Disconnect Switch

(Cat 1494V-DS400; 1494V-DSX400 -- Series D)

Additional Resources:

1) Go to http://www.literature.rockwellautomation.com; 2) Go to Search. Type in publication number: 42052-154-01

Disconnect Switch Installation (Right hand installation shown. For left hand installation follow similar procedure.)

Disconnect Handle Installation

Install gasket.

Install handle and spring bracket.

Install defeater lever.

HOLD FLUSH

TO INSIDE

OF ENCLOSURE

MEASURE TO

INSIDE OF THE

TOP OF ENCLOSURE

TOP HANDLE HOLE

BOTTOM HAND

LE HOLE

TAPE

Install disconnect switch.

Overlay template E (400 A) over D .

90 -130 lb-in

HOLD FLUSH

TO INSIDE

OF ENCLOSURE

MEASURE TO

INSIDE OF THE

TOP OF ENCLOSURE

TOP

BOTT

HOLD FLUSH

TO INSIDE

OF ENCLOSURE

MEASURE TO

INSIDE OF THE

TOP OF ENCLOSURE

TOP

BOTT

4 - 3/4

5 - 1/2

6-1/2

Switch Mounting Holes

Center punch and drill (4)

11/32" holes for thread

forming (TAP-TITE) scre

ws provided with switch

4205

2-1

-01 (

)

in U.S.

Disconne

ct Switch Hole Location Template (400A)

RIGHT

Hand Installation

(Use opposite side for left h

and installation)

Use template D to locate handle holes on mounting plate.

60 - 80 lb-in

7 - 11 lb-in

IMPORTANT: Apply grease to O-Ring

to retain into handle groove.

ATTENTION: Do not install, congure, operate or maintain this product until you have read the product documentation and the documents in the Additional Resources section for installing, conguring, operating or maintaining

equipment. To get the product documentation go to http://www.literature.rockwellautomation.com or contact your local sales oce or Rockwell Automation representative.

ATTENTION: Ne pas installer, congurer, exploiter ou maintenir ce produit tant que vous n’avez pas lu sa documentation et les documents de la rubrique Documents connexes pour l’installation, la conguration, l’exploitation et la

maintenance de l’équipement. Pour obtenir de la documentation, rendez-vous sur le site http://www.literature.rockwellautomation.com ou contactez votre agence commerciale Rockwell Automation locale ou son représentant.

ACHTUNG: Für die Installation, Konguration, den Betrieb und die Wartung dieses Produkt lesen Sie sich bitte zunächst die Produktdokumentation sowie die Dokumente im Abschnitt „Weitere Informationen“ durch. Die

entsprechende Produktdokumentation nden Sie unter http://www.literature.rockwellautomation.com oder kontaktieren Sie Ihr lokales Vertriebsbüro bzw. einen Rockwell Automation-Mitarbeiter.

ATENCIÓN: No instale, congure, opere ni mantenga este producto hasta que haya leído la documentación del producto y los documentos en la sección Recursos adicionales para la instalación, conguración, operación o

mantenimiento de equipo. Para conseguir la documentación, diríjase a http://www.literature.rockwellautomation.com o póngase en contacto con su ocina regional de ventas o representante de Rockwell Automation.

ATENÇÃO: Não instale, congure, opere ou mantenha este produto até que você leia a documentação do produto e os documentos na seção Recursos adicionais para a instalação, conguração, operação ou manutenção do

equipamento. Para conseguir a documentação, visite http://www.literature.rockwellautomation.com ou entre em contato con seu escritório de vendas regional ou representante da Rockwell Automation.

ATTENZIONE: Non installare, congurare, attivare o riparare questo prodotto senza avere prima letto la relativa documentazione nonchè i documenti indicati nella sezione Ulteriori Risore riguardanti l’installazione, la

congurazione, l’attivazione o la riparazione dell’apparecchiatura. Per la documentazione sul prodotto visitare il sito http://www.literature.rockwellautomation.com o contattare l’ucio vendite o il rappresentate Rockwell

Automation di zona.

WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Follow NFPA 70E requirements. Install in suitable enclosure. Keep free from contaminants.

The following procedures are critical to the proper operation of the disconnect handle and switch. Failure to follow these steps can result in damage to the equipment and/or serious injury or death to the operator.

Installation, adjustments, putting into service, use, assembly, disassembly, and maintenance shall be carried out by suitably trained personnel in accordance with applicable code of practice. In case of malfunction or

damage, no attempts at repair should be made. The product should be returned to the manufacturer for repair. Do not dismantle the product.

Center punch and

drill (4) holes

for 5/16-18 thread

forming screws

provided with switch.

9/32" Dia.

http://www.literature.rockwellautomation.com

1 2

Summary of Contents

Page 1 - Product Information

Product InformationBulletin 1494V Variable Depth 400A Disconnect Switch(Cat 1494V-DS400; 1494V-DSX400 -- Series D)Additional Resources:1) Go to ht

Page 2 - Connecting Rod Installation

Comments to this Manuals

No comments

Rockwell-automation 1494V-DS400_DSX400 - Series D Variable Depth 400A User Manual

Browse online or download User Manual for Equipment Rockwell-automation 1494V-DS400_DSX400 - Series D Variable Depth 400A . Rockwell Automation 1494V-DS400_DSX400 - Series D Variable Depth 400A Disconnect Switch User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Rockwell-automation 1494V-DS400_DSX400 - Series D Variable Depth 400A