Rockwell-automation 1494V-DS400_DSX400 - Series D Variable Depth 400A User Manual download pdf (Page 2)

PN-133642

DIR 42052-156 (Version 03)

ATTENTION: Check for proper operation.

Go to Installation Instruction Sheet 42052-154-01.

Trailer Fuse Block Installation

Connecting Rod Installation

Cutting Connecting Rod (Cut (2) Connecting Rods; rst rod connects the handle to the switch, second rod provides

stiening for the enclosure ange)

Measure working depth of enclosure.

Measure, mark and

cut (2) connecting rods.

Remove burrs

N minus 3-3/4"

Enclosure

Working Depth

(Inside Flange

of Enclosure to

Mounting Plate)

Mounting

Plate

Drive Bar

Rotate connecting rod into

drive bar 16 turns.

Pull rod up and verify if

rod is touching bottom of

spring bracket. (If not,

rotate rod until it touches

spring bracket)

Zero

Clearance

Connecting

Rod

Hitch Pin

Primary Link

First rod connects the handle to the switch

Second rod provides stiening for the enclosure ange

150 - 200 lb-in

Verify that disconnect switch and handle are in "OFF"

position. (Switch blades will be visible.)

Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Publication 1494V-IN102C-EN-E - January 2013

1 2

No comments

Rockwell-automation 1494V-DS400_DSX400 - Series D Variable Depth 400A User Manual Page 2