Rockwell-automation 1799-D16U16BAGL 16 Input/16 Output Digital and 2 I User Manual download pdf (Page 17)

16 Input/16 Output Digital and 2 Input/2 Output Analog Embedded I/O Boards 17

Publication 1799-IN011A-EN-P - February 2007

Configure the Parameters

The 1799 I/O boards have parameters that are configurable through a DeviceNet

configuration tool such as RSNetWorx for DeviceNet software. The DeviceNet

configuration tools require an Electronic Data Sheet (EDS) for the 1799 I/O boards to

configure the module’s parameters. Find the EDS files at http://www.odva.org

Use the descriptions in the following table to help you configure the parameters.

The DeviceLogix capable boards, 1799-D16U16BAGL and 1799-D16U16VAGL, have

additional parameters, which are described in the DeviceLogix User Manual, publication

number ACIG-UM001, and in the Embedded I/O for DeviceNet Technical Data,

publication number 1799-TD001.

Parameter Description

AutoBaud Enables the board to match the network’s communication

rate. When enabled, Baud Rate parameter is ignored.

Input Off-to-On Filter Time Controls the amount of time the input must be in the on

state before the board reports the input as on.

Input On-to-Off Filter Time Controls the amount of time the input must be in the

off-state before the board reports the input as off.

Output Idle State Controls the state of each output when the DeviceNet

master is in an idle-state.

Output Fault State Controls the state of each output when the board loses

communication with the DeviceNet master.

Output Idle Value Controls the value that outputs will have when the output

idle-state is set to use idle value.

Output Fault Value Controls the value that outputs will have when the output

fault-state is set to use fault value.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

No comments

Rockwell-automation 1799-D16U16BAGL 16 Input/16 Output Digital and 2 I User Manual Page 17