Publication 2364P-5.10 - December 1999Installation InstructionsOverhead Bus for Bulletin 2300 MCCsFor Use in Parallel Bus Supply ConfigurationsContent
Publication 2364P-5.10 - December 19992Other Items Needed Before you begin, be sure you have the following:• Tools you will need to:• Loosen, tighten,
Publication 2364P-5.10 - December 19993Preliminary Steps Before you begin the procedures in this document:1. Verify that the individual shipping split
Publication 2364P-5.10 - December 19994Note: Verify that there is sufficient working space above and around the MCCs. If not, install the bus tabs a
Publication 2364P-5.10 - December 19995Bolt Assembly½” ConicalWasher½” Flat Washer½” Nut½” Flat Washer½”-13 x 2¼”(Specifications apply to feeder and b
Publication 2364P-5.10 - December 199966. For each input bay that is to be supplied by the overhead bus:a. Remove the top cover and side covers of the
Publication 2364P-5.10 - December 199977. Mount the bus assemblies to the MCCs as shown in Figure 6 (use the taptite hardware that was previously remo
Publication 2364P-5.10 - December 1999 PN S-3068-1Supersedes Publication 2364P-5.10 - December 1998 Copyright 1999 of Rockwell International Corporati
Comments to this Manuals