Rockwell-automation 2706-PENI_PDNI InView EtherNet/IP Module and InVie User Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 53
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
Publication 2706-IN010C-MU-P
8 InView EtherNet/DeviceNet Module
Mounting Module to P72
and P74 Displays
The P72 and P74 InView displays do not have a track for mounting
the module on the display. You can remove the back plate and mount
the bottom of the enclosure to a wall or panel near the display. Use
screws (8-32 UNC-2A) measuring a minimum of 1/4” plus the
thickness of the mounting surface.
The dimensions for the 4 mounting holes are shown below.
For More Information
Related Publications
If you would like a manual, you can:
download a free electronic version from the internet:
www.ab.com/micrologix or www.theautomationbookstore.com
purchase a printed manual by:
contacting your local distributor or Rockwell Automation
representative
visiting www.theautomationbookstore.com
and placing your
order
calling (1) 800 963-9548 (USA/Canada)
or (001) 330 725-1574 (Outside USA/Canada)
3.46
(88 mm)
7.40 in (188 mm)
Enclosure Case
For Refer to this
Document
Pub. No.
A more detailed description on how to
install and use your Ethernet Interface.
Ethernet Interface User
Manual
1761-UM006A-EN-P
Instructions on installing a 1761-NET-AIC or
1761-NET-DNI Interface Converter.
AIC+ and DNI
Installation Instructions
1761-5.11
A more detailed description on how to
install and use your DeviceNet Interface.
DeviceNet Interface
User Manual
1761-6.5
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 52 53

Comments to this Manuals

No comments