Rockwell Automation 1785 PLC-5 Specifications download pdf (Page 31)

PLC-5 Ethernet Interface Module 31

Publication 1785-IN019B-EN-P - January 2007

Identify the Module Within a Network

The PLC-5 Ethernet Interface Module supports the Simple Network Management Protocol

(SNMP).

The module responds automatically to SNMP requests and maintains a management

information base (MIB) file (Level II). Information kept in this file could include:

• number of datagrams received.

• number of fragmented packets received.

• maximum number of TCP connections allowed.

Save and Restore Programs

You can physically and logically save and restore all programs, if you are using:

• any release of RSLogix 5 programming software.

• AI Programming Software, release 7.21 or later, for all logical saves/restores.

• 6200 Series Programming Software, release 5.2 or later, for all logical saves/restores.

• an enhanced PLC-5 controller, series B or later.

Domain Name Service

DNS allows an Internet Protocol (IP) address in symbolic form to be converted into the

equivalent numeric IP address. For the PLC-5 controller, this conversion is a service provided

by a remote host on the network.

F002 Incomplete address

F003 Incorrect address

F006 Addressed file does not exist in target controller

F007 Destination file is too small for number of words requested

F00A Target controller cannot put requested information in packets

F00B Privilege error, access denied

F00C Requested function is not available

F00D Request is redundant

F011 Data type requested does not match data available

F012 Incorrect command parameters

Code

(Hexadecimal - word 1 of

the control block)

Description

(displayed on the data monitor screen)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

No comments

Rockwell Automation 1785 PLC-5 Specifications Page 31