Rockwell-automation 1395 Digital DC Drive User Manual Page 57

  • Download
  • Add to my manuals
  • Print
  • Page
    / 91
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 56
Publication 2361-5.01 July 1998
Installing Your Drive 5-3
1. Remove the lifting angle, if it is still attached.
2. Remove the top plate from the disconnect bay. If the drive has a
top hat assembly, this plate will not be needed.
3. If the drive has a top hat assembly, mount the assembly to the
drive (according to the assembly instructions), and remove the
assembly’s top plate.
4. Punch holes for the AC input into the top plate within the area
shown in Figure 5.1. Clean the punched area to ensure that metal
shavings will not fall into the drive.
5. Secure the top plate to the drive (or top hat assembly), and
replace the lifting angle.
!
ATTENTION: The top plate must be removed from
the drive before any cutting, drilling, tapping, or welding
can be done. Failure to do so could result in damage to
sensitive components.
Page view 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 90 91

Comments to this Manuals

No comments