Rockwell-automation 1769-OF4VI Compact I/O Isolated Analog Modules User Manual Page 90
- Page / 128
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Publication 1769-UM014B-EN-P - May 2010
A-8 Specifications
Table A.4 1769-OF4VI Specifications
Specification 1769-OF4VI
Accuracy Drift with
Temperature
±0.0086% FS per °C
Output Ripple
(1)
Range 0…50 kHz
(referred to output range)
±0.05%
Non-linearity (in percent full
scale)
±0.05%
Repeatability
(2)
(in percent full scale)
±0.05%
Output Error Over Full
Temperature Range
0…60 °C (+32…+140 °F)
±0.8%
Output Impedance <1
Open and Short-circuit
Protection
Yes
Maximum Short-circuit Current 30 mA
Output Overvoltage Protection Yes
Output Response at System
Power Up and Power Down
Power up: +
1.2V dc spike for less than 0.4 ms
Power down: 1.2V dc spike for less than 21 ms
Rated Working Voltage
(3)
30V ac/30V dc
Output Group to Bus Isolation 500V ac or 710V dc for 1 minute (qualification test)
30V ac/30V dc working voltage
Module OK LED On: module has power, has passed internal diagnostics,
and is communicating over the bus.
Off: Any of the above is not true.
Channel Diagnostics Over- or under-range by bit reporting
System Power Supply Distance
Rating
The module may not be more than 8 modules away from
the system power supply.
Recommended Cable Belden 8761 (shielded)
Vendor I.D. Code 1
Product Type Code 10
Product Code 42
Input Words 6
Output Words 5
Configuration Words 32
(1)
Output ripple is the amount a fixed output varies with time, assuming a constant load and temperature.
(2)
Repeatability is the ability of the output module to reproduce output readings when the same controller value is applied to it
consecutively, under the same conditions and in the same direction.
(3)
Rated working voltage is the maximum continuous voltage that can be applied at the input terminal, including the input
signal and the value that floats above ground potential (for example, 10V dc input signal and 20V dc potential above ground).
- User Manual 1
- Important User Information 2
- Table of Contents 3
- Table of Contents iii 5
- Who Should Use This 7
- How to Use This Manual 7
- Conventions Used in This 8
- General Description 10
- Overview 1-3 11
- System Overview 12
- System Operation 13
- Module Operation 14
- Output Modules Block Diagram 15
- Module Field Calibration 16
- Installation and Wiring 17
- Power Requirements 18
- General Considerations 18
- ATTENTION 19
- System Assembly 20
- Minimum Spacing 22
- Panel Mount 23
- Replace a Single Module 24
- Within a System 24
- Field Wiring Connections 25
- System Wiring Guidelines 26
- Accuracy 27
- Label the Terminals 31
- SLOT # _____ 32
- MODULE TYPE ______ 32
- Wire the Modules 33
- Figure 2.8 Belden 8761 Wire 34
- 1769-IF4I 35
- Earth Ground 37
- Current Load 37
- Voltage Load 38
- 1769-IF4I Input Module 39
- Addressing 39
- 1769-IF4I Input Image 40
- 1769-IF4I Output Image 40
- 1769-IF4I Configuration File 40
- 1769-IF4I Input Data File 41
- Time Stamp Value (Word 4) 42
- 1769-IF4I Output Data File 43
- 1769-IF4I Configuration 44
- Data File 44
- Channel Configuration 45
- Enable/Disable Channel 46
- Input Filter Selection 46
- Input Type/Range Selection 47
- Input Data Selection Formats 48
- 1769-IF4I Real Time Sampling 49
- 1769-IF4I Time Stamping 50
- 1769-IF4I Process Alarms 51
- Figure 3.2 Alarm Deadbands 52
- 1769-OF4CI Output Module 53
- Memory Map 53
- 1769-OF4VI Output Module 54
- 1769-OF4CI and -OF4VI 55
- Output Data File 55
- Input Data File 56
- Configuration Data File 59
- Clamping/Limiting 62
- Clamp/Limit Alarms 62
- Hold for Initialization 65
- Safety Considerations 73
- Module Operation versus 74
- Channel Operation 74
- Power Cycle Diagnostics 75
- Channel Diagnostics 75
- Non-critical vs. Critical 76
- Module Errors 76
- Module Error Definition 76
- Module Error Field 77
- Error Codes 78
- Contacting Rockwell 81
- Automation 81
- Module Inhibit Function 81
- Specifications 83
- 30…1000 MHz 84
- 1769-IF4I Input 85
- A-4 Specifications 86
- 1769-OF4CI Output 87
- A-6 Specifications 88
- 1769-OF4VI Output 89
- A-8 Specifications 90
- MicroLogix 1500 91
- Input Module’s Input Image 92
- Configure Analog I/O 94
- Modules in a MicroLogix 94
- 1500 System 94
- Configure I/O Modules 102
- Appendix 105
- Overview 105
- Add the DeviceNet Adapter 106
- Configure the 1769-IF4I 108
- Input Module Example 108
- 3. Double-click on 1769-IF4I 109
- Configure the 1769-OF4CI 113
- Output Module Example 113
- IMPORTANT 116
- Positive Decimal Values 117
- Negative Decimal Values 118
- 10 (V1/V2) 119
- 2 120
- 3 121
- Ideal Transfer 121
- Actual Transfer 121
- Function 121
- 4 122
- 2 Index 124
- Index 3 125
- 4 Index 126
- Rockwell Automation Support 128
- Documentation Feedback 128
Related products and manuals for Equipment Rockwell-automation 1769-OF4VI Compact I/O Isolated Analog Modules
Equipment Rockwell-automation 1764-28BXB MicroLogix 1500 Programmable Controller User Manual
(27 pages)
(27 pages)
Equipment Rockwell-automation 1747-PCIL Chassis Interface Module for 1746 Local User Manual
(16 pages)
(16 pages)
Equipment Rockwell-automation 1769-IF4I CompactLogix Isolated Analog Input Modul User Manual
(24 pages)
(24 pages)
Equipment Rockwell-automation 1769-IQ16F Compact 24V dc Sink/Source Input Module User Manual
(16 pages)
(16 pages)
Equipment Rockwell-automation 1769-L23E-QB1B_QBFC1B_QBFC1B CompactLogix Packaged User Manual
(44 pages)
(44 pages)
Equipment Rockwell-automation 1734-AENT, Series B 1734 POINT I/O EtherNet/IP Ada User Manual
(24 pages)
(24 pages)
Equipment Rockwell-automation 1747-OS302_OS401 SLC 5/03 and 5/04 Processors Firm User Manual
(8 pages)
(8 pages)
Equipment Rockwell-automation 1788-FBJB6 Foundation Fieldbus Junction Box Instal User Manual
(18 pages)
(18 pages)
Equipment Rockwell-automation 1756-CNB ControlLogix ControlNet Bridge Module Ins User Manual
(32 pages)
(32 pages)
Equipment Rockwell-automation 1732E-IR4IM12R ArmorBlock Dual-Port EtherNet/IP 4- User Manual
(86 pages)
(86 pages)
Equipment Rockwell-automation 1771-IN ac (24V) Input Module Installation Instruc User Manual
(8 pages)
(8 pages)
Equipment Rockwell-automation 1771-IGD TTL Input Module Installation Instruction User Manual
(12 pages)
(12 pages)
Equipment Rockwell-automation Logix5000 Controllers Ladder Diagram Programming M User Manual
(22 pages)
(22 pages)
Equipment Rockwell-automation 1785-Lx0C15 ControlNet PLC-5 Programmable Controll User Manual
(148 pages)
(148 pages)
Equipment Rockwell-automation 1771-ID16 SERIES B Install Instr ac/dc (120V)Isola User Manual
(16 pages)
(16 pages)
Equipment Rockwell-automation 1792D-16BVTOD ArmorBlock MaXum 16 Input Module Ser User Manual
(16 pages)
(16 pages)
© 2020, manymanuals.com. All rights reserved. | 2.443 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals