Rockwell-automation 1771-OVN DC Output Mod. Installation Instructions User Manual

Browse online or download User Manual for Equipment Rockwell-automation 1771-OVN DC Output Mod. Installation Instructions. Rockwell Automation 1771-OVN DC Output Mod. Installation Instructions User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Publication 1771-IN036C-EN-P - July 2002
DC (10-30V) Output Module
Cat. No. 1771–OVN Series B
This document provides information on:
See page
Important User Information 1
Preinstallation Considerations 4
Calculate Power Requirements 4
Initial Handling 5
Key the I/O Chassis 5
Install the Module and Field Wiring Arm 6
Connect Wiring to the Field Wiring Arm 7
Replacing the Fuse 10
For this reference information See page
Intepreting the Status Indicators 10
Hazardous Location Approval 11
Specifications 12
Because of the variety of uses for the products described in this
publication, those responsible for the application and use of these
products must satisfy themselves that all necessary steps have been
taken to assure that each application and use meets all performance
and safety requirements, including any applicable laws, regulations,
codes and standards. In no event will Rockwell Automation be
responsible or liable for indirect or consequential damage resulting
from the use or application of these products.
Any illustrations, charts, sample programs, and layout examples
shown in this publication are intended solely for purposes of
example. Since there are many variables and requirements associated
with any particular installation, Rockwell Automation does not
assume responsibility or liability (to include intellectual property
liability) for actual use based upon the examples shown in this
publication.
Important User Information
Installation Instructions
To The Installer
Page view 0
1 2 3 4 5 6 ... 15 16

Summary of Contents

Page 1 - DC (10-30V) Output Module

Publication 1771-IN036C-EN-P - July 2002DC (10-30V) Output ModuleCat. No. 1771–OVN Series BThis document provides information on:See pageImportant Use

Page 2 - DC (10–30V) Output Module2

DC (10–30V) Output Module10Publication 1771-IN036C-EN-P - July 2002The module has 32 status indicators on the module front plate. Theserepresent the

Page 3 - DC (10–30V) Output Module 3

DC (10–30V) Output Module 11Publication 1771-IN036C-EN-P - July 2002The following information applies when operating this equipment in hazardouslocat

Page 4 - Requirements

DC (10–30V) Output Module12Publication 1771-IN036C-EN-P - July 2002Outputs per module 32 (4 groups of 8)Module Location 1771ĆA1B thru ĆA4B or later I

Page 5 - Keying the I/O Chassis

Specifications(cont.) DC (10–30V) Output Module 13Publication 1771-IN036C-EN-P - July 2002Emissions CISPR 11Group 1, Class A (with appropriate enclosu

Page 6 - Field Wiring Arm

DC (10–30V) Output Module14Publication 1771-IN036C-EN-P - July 2002

Page 7 - Connect Wiring to the

DC (10–30V) Output Module 15Publication 1771-IN036C-EN-P - July 2002

Page 8

DC (10–30V) Output Module16Publication 1771-IN036C-EN-P - July 2002Publication 1771-IN036C-EN-P - July 2002Supersedes publication 1771Ć5.36 - Februar

Page 9

DC (10–30V) Output Module2Publication 1771-IN036C-EN-P - July 2002Allen–Bradley publication SGI–1.1, Safety Guidelines forApplication, Installation,

Page 10 - Replacing the Fuses

DC (10–30V) Output Module 3Publication 1771-IN036C-EN-P - July 2002ATTENTION!Environment and EnclosureThis equipment is intended for use in a Polluti

Page 11 - AVERTISSEMENT

DC (10–30V) Output Module4Publication 1771-IN036C-EN-P - July 2002!ATTENTIONPreventing Electrostatic DischargeThis equipment is sensitive to electros

Page 12 - Specifications

DC (10–30V) Output Module 5Publication 1771-IN036C-EN-P - July 2002!ATTENTIONRemove power from the 1771 I/O chassisbackplane and field wiring arm bef

Page 13

DC (10–30V) Output Module6Publication 1771-IN036C-EN-P - July 2002!ATTENTIONRemove power from the 1771 I/O chassisbackplane and field wiring arm befo

Page 14 - DC (10–30V) Output Module14

DC (10–30V) Output Module 7Publication 1771-IN036C-EN-P - July 2002!WARNINGWhen you connect or disconnect the wiring armwith field power applied, an

Page 15 - DC (10–30V) Output Module 15

DC (10–30V) Output Module8Publication 1771-IN036C-EN-P - July 2002Connection Diagram for the 1771ĆOVN/B DC Output ModuleOutput 0Output 2Output 4Outpu

Page 16 - DC (10–30V) Output Module16

DC (10–30V) Output Module 9Publication 1771-IN036C-EN-P - July 2002Table BModule Output Terminal AssignmentsTerminalNumberOutput Assignment I/O progr

Comments to this Manuals

No comments