Rockwell-automation 1791R-XXXX CompactBlock Distributed I/O on Remote User Manual download pdf (Page 5)

CompactBlock Distributed I/O on Remote I/O Series D 5

Publication

1791R-IN002B-EN-P - August 2003

Installing CompactBlock I/O

Follow these steps, to install the 1791R I/O module:

1. Set the Node Address on the Base Module.

2. Mount the Block(s).

3. Connect the Input/Output Wires to the Block.

4. Connect the RIO Cable.

5. Select termination for the module.

6. Connect power to the module.

7. Remove the terminal block.

8. Insert the terminal block.

9. Communicate with the 1791R Module.

These steps are explained in detail in the following procedures.

ATTENTIO

N

!

Preventing Electrostatic Discharge

This equipment is sensitive to electrostatic discharge, which

can cause internal damage and affect normal operation. Follow

these guidelines when you handle this equipment:

• Touch a grounded object to discharge potential static.

• Wear an approved grounding wriststrap.

• Do not touch connectors or pins on component boards.

• Do not touch circuit components inside the equipment.

• If available, use a static-safe workstation.

• When not in use, store the equipment in appropriate static-safe

packaging.

1 2 3 4 5 6 7 8 9 10 ... 35 36

Comments to this Manuals

No comments