Rockwell-automation 2099-K7KCB-1 Kinetix 7000 DC-DC Converter and Cont User Manual download pdf (Page 11)

Publication 2099-IN002B-EN-P — October 2008

Kinetix 7000 DC-DC Converter and Control Board Kits 11

Replace the DC-DC

Converter Fuse

To access the dc-dc converter fuse, the dc-dc converter cassette cover must be

removed.

1. Remove the dc-dc converter cassette cover.

Refer to Remove the Drive Covers

on page 4 and follow the procedure

for your drive.

2. Replace the fuse.

Refer to Additional Resources

on page 12 for manufacturers datasheet

information.

3. Replace the dc-dc converter cassette cover.

Refer to Remove the Drive Covers

on page 4 and reverse the order of

steps for your drive module.

4. Return the drive to operation.

Kinetix 7000 Drive

(2099-BM07-S is shown)

DC-DC Converter Fuse

DC-DC Converter Cassette

LittelFuse

7.5 A, 32V dc

PN 29707.5

IMPORTANT

When replacing the top cover, temporarily remove the

fiber-optic cables from the drive Tx and Rx connectors. This

allows the top cover to seat properly with the chassis.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

No comments

Rockwell-automation 2099-K7KCB-1 Kinetix 7000 DC-DC Converter and Cont User Manual Page 11