Rockwell-automation 2099-K7KCB-1 Kinetix 7000 DC-DC Converter and Cont User Manual download pdf (Page 3)

Publication 2099-IN002B-EN-P — October 2008

Kinetix 7000 DC-DC Converter and Control Board Kits 3

Before You Begin

Make sure you have the following spare parts, tools, and have removed power

so you can safely remove the drive covers and assemblies.

Parts List

This publication provides installation instructions for removing and replacing

the following components:

• DC-DC con

verter cassette kit (catalog number 2099-K7KCP-1)

• Control board assembly kit (catalog n

umber 2099-K7KCB-1)

• DC-DC con

verter fuse (customer supplied)

Required Tools

• Phillips screwdriver

• Flat blade screwdriver

• 3/16 in. thin-walled socket, nut driver, or open-ended wrench

• 1/4 in. thin-walled socket, nut dri

ver, or open-ended wrench

Remove Power

Follow these steps to remove power from your drive.

1. Verify that all control and input power has been removed from the

system.

ATTENTION

Do not remove the Kinetix 7000 drive from the panel. Due to the

physical size and weight of the drives, perform these

procedures with the drive mounted to the panel.

ATTENTION

To avoid shock hazard or personal injury, assure that all

power has been removed before proceeding. This system

may have multiple sources of power. More than one

disconnect switch may be required to de-energize the

system.

1 2 3 4 5 6 7 8 ... 15 16

No comments

Rockwell-automation 2099-K7KCB-1 Kinetix 7000 DC-DC Converter and Cont User Manual Page 3