PowerFlex® DC Drive - Frame C AC Line Snubber Board and High Wattage Resistors 5
4. Disconnect the HIM Communication cable from the connector on the
upper right corner of the Control board and set the cover aside.
Step 3: Move the EMI
Shield and Control Board
You must move the Control EMI shield that holds the Control board in order
to access the AC Line Snubber circuit board and Resistors.
1. Carefully disconnect the cables from connectors XFCD and XR on the
Control board.
Pull tabs out
to disconnect
cable.
=
Disconnect
cables
Comments to this Manuals