Rockwell-automation 931S-P1C2D-DC Active Converter, Universal RTD User Manual download pdf (Page 3)

1. General instructions

• Disconnect power prior to installation

• Installation only by Qualified personnel

• Follow all applicable local and national electrical codes

• Due to potential hazardous voltages in close proximity, use a non-

conductive tool and proper PPE when adjusting the potentiometers

on the front panel.

Please observe that applications with high insulation voltages require

sufficient space or insulation to adjoining devices.

Protective measures must be taken against electrostatic

discharges (ESD) when mounting and setting 931S-P1C2D-DC.

2. Application

RTD 3 Way Active Converters 931S-P1C2D-DC are used for galvanic

isolation and conversion of temperature, resistance and potentiometer

signals. Input and output signals are calibrated switch selectable via

DIP switches. It is not necessary to adjust the pre-settable measurement

ranges. A +/- 12.5 % variation can be achieved in the respective range by

switching in potentiometers for zero and span. The analog signal is linear

to the temperature and to the resistance or to the potentiometer setting.

WARNINGWARNING

1 2 3 4 5 6 7 8 ... 34 35

No comments

Rockwell-automation 931S-P1C2D-DC Active Converter, Universal RTD User Manual Page 3