Rockwell-automation 931S-P1C2D-DC Active Converter, Universal RTD User Manual download pdf (Page 4)

3. Configuring the device

3.1 Tools

A screwdriver with a 2.5 mm blade is required to set the device,

and to connect the conductors to the terminals.

3.2 Open the device

Remove the connector Press the lock lightly

on both sides of the housing to unlock it (1),

remove the upper part of the housing and the

electronics (2).

3.3 Settings

Set input and output ranges, minimum input

values and measuring span via the DIP switches

SW1 and SW2 according to the following tables.

The potentiometers Span (gain) and Zero (offset)

can be activated by the switch SW1/8, accessible

from the front below the cover (3), to finely

calibrate the gain and offset

Zero

Span

SW2

SW1

1 2 3 4 5 6 7 8 9 ... 34 35

No comments

Rockwell-automation 931S-P1C2D-DC Active Converter, Universal RTD User Manual Page 4