1784-6.5.22 - November 1999
Configure the Card Hardware 2-7
Select the Interrupt Setting
Important: If you need to use the KTx as a remote I/O scanner within a
SoftLogix5 system, you must set an interrupt for the scanner
channel
Important: When selecting configuration settings, check for conflicts with
other interface cards and system memory. If there is a conflict, the
system will not operate properly. To avoid the conflict, select a
unique interrupt setting for each channel. If another card is already
using a channel’s default interrupt, you must pick a new interrupt
for the channel.
About KT
x
Interrupts
The 1784-KTx cards are set to these interrupt(s):
Catalog Number Channel Interrupt
1784-KTS 1 no interrupt
1784-KTX 1
1784-KTXD 1
2
Comments to this Manuals