Rockwell Automation 1785 PLC-5 User Manual Page 75
- Page / 148
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
1785-UM022C-EN-P - February 2008
Chapter 3
Understanding the ControlNet
System Software
Using This Chapter This chapter describes the configuration and programming software
that you use with your ControlNet PLC-5 processor and specific
details about their maintenance. Although the software packages are
separate tools, they have specific interdependencies that must be met
in order to keep projects synchronized between one another.
Configuring and Programming
Your ControlNet System
Use the following software packages to configure and program your
ControlNet system.
Additionally, use:
• RSNetWorx software to configure the individual scheduled
connections for the ControlNet PLC-5. RSNetWorx software
creates a project (.xc) file on your personal computer when you
save the project. RSNetWorx software writes to the Channel 2
configuration memory during an online save to the ControlNet
PLC-5.
• RSLogix 5 software to configure and program all other
parameters within the ControlNet PLC-5. RSLogix 5 software
creates a project (.rsp) file on your personal computer when you
save the project.
These two software packages are separate tools because RSNetWorx
software is used to configure the entire ControlNet network and
RSLogix 5 software is used to configure node-specific information.
Use: To:
RSNetWorx for ControlNet
(henceforth RSNetWorx)
software
define ControlNet network parameters, such as:
• network update time
• media redundancy
• physical media configuration
• maximum scheduled nodes
• maximum unscheduled nodes
• monitor I/O map entry status
RSLogix 5 software
• enter user program files
• create/delete/monitor data table files
• enter module configuration
• enter channel 0, 1A, 1B, and 3 configuration
• administer passwords and privileges
RSLinx software
provide the ControlNet network interfaces to:
• poll the network for active devices
• monitor station diagnostics
- Controllers 1
- Important User Information 2
- Summary of Changes 3
- Table of Contents 5
- Chapter 3 6
- Chapter 4 7
- Chapter 5 7
- Appendix A 7
- Appendix B 7
- Appendix C 7
- Appendix D 8
- Appendix E 8
- Terminology 10
- Installing Your ControlNet 13
- PLC-5 Processor 13
- Identifying ControlNet PLC-5 15
- Processor Components 15
- Before You Install the 17
- Programmable Controller 17
- Estimated Battery Lifetimes 20
- Dispose of a Battery 20
- Setting the I/O Chassis 21
- Backplane Switches 21
- Configuration Plug 22
- Installing Keying Bands 22
- Selecting the DH+ Station 23
- Address of Channel 1A 23
- Specifying the Serial 24
- Interface of Channel 0 24
- Selecting the ControlNet 24
- Network Address of 24
- Channel 2 24
- Installing a Remote 25
- I/O Link 25
- Connecting to a 29
- ControlNet Network 29
- Connecting a 31
- Programming Terminal 31
- Serial Channel 32
- ControlNet Connection 33
- Serial Cables 34
- DH+ Programming Cables 35
- Remote I/O Cables 35
- ControlNet Cables 35
- Processor 39
- I/O Chassis 41
- . . .. . 43
- Using I/O Forcing Operations 45
- Housekeeping 46
- Logic Scan 46
- First Word 48
- PCSC Overflow Bit 48
- PCSC New Data Bit 48
- PCSC Enable Bit 48
- Understanding Scheduled 49
- Connection Types 49
- Understanding ControlNet 54
- I/O Mapping 54
- RPI Default = 4 x NUT 59
- I:010 6 O:010 2 63
- Using the ControlNet 69
- PLC-5 Processor in a 69
- ControlNet I/O System 69
- Tap (4 choices) 70
- 1786-TPR 70
- I/O System 72
- 1.5 system 73
- Understanding the ControlNet 75
- System Software 75
- I/O Configuration Utility 76
- Information 77
- ControlNet System 81
- Programming Your 81
- 1756-CNB 82
- ControlBus 82
- Using the ControlNet I/O 83
- Transfer Instruction 83
- Sending Continuous Messages 85
- Using ControlNet 86
- Immediate Data Input and 86
- Output Instructions 86
- IMMEDIATE DATA INPUT 87
- N11:232 232 87
- IMMEDIATE DATA OUTPUT 88
- N12:175 175 88
- Using Selectable Timed 89
- Interrupts with a Program 89
- Your ControlNet System 91
- Status Indicators 93
- Using the DH+/RIO 95
- Monitoring ControlNet 96
- Configuration and Status 96
- Processor Specifications 97
- AVERTISSMENT 100
- Processor Status File 101
- S:13-S:24 111
- S:26-S:35 112
- S:36-S:78 113
- S:79-S127 115
- B-16 Processor Status File 116
- ControlNet Instruction Set 117
- Immediate I/O Execution Times 118
- ControlNet I/O Map-Entry 119
- Status Words and 119
- Error Codes 119
- ControlNet I/O status file: 120
- ControlNet I/O status file 121
- Fault Codes 131
- Appendix F 133
- Numerics 137
- 2 Index 138
- Index 3 139
- 4 Index 140
- Index 5 141
- 6 Index 142
- Index 7 143
- 8 Index 144
- How Are We Doing? 145
- BUSINESS REPLY MAIL 146
- Rockwell Automation 148
Related products and manuals for Recording Equipment Rockwell Automation 1785 PLC-5
(388 pages)
(63 pages)© 2020, manymanuals.com. All rights reserved. | 0.314 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals