Publication 2711P-QS001A-EN-P - October 2007 103
Qualify the Runtime Application Chapter 7
3. In the Communication Setup
dialog, select the local tab.
4. Right-click RSLinx Enterprise
and select Add Driver.
5. Select the Remote I/O
(1784-PKTX, 2711P-RN6)
driver and click OK.
The 2711P-RN6 driver is
required for PanelView Plus
700 to 1500 terminals.
The 2711P-RN1 driver is
required for PanelView Plus
400 and 600 terminals.
6. Configure Remote I/O
Properties.
a. Accept the default name
and default Jumper ID.
b. Set the baud rate to
match the original baud
rate setting of the
Remote I/O network.
c. Click OK.
On a Remote I/O network, the
configuration on the local tab is
accessed to browse for tags but
no communication takes place.
When browsing for tags on a
DH+ network, RSLinx
communicates with the controller
to acquire the available registers.
Comments to this Manuals