Rockwell-automation Migrating PanelView Enhanced Terminal Applications User Manual download pdf (Page 32)

32 Publication 2711P-QS001A-EN-P - October 2007

Chapter 4 Review the Application Conversion Log

<PanelView ’e’ Tag Name> converted

to memory tag, as its data type is not

supported.

Any PanelView ’e’ Remote I/O tags with these data types are

converted to HMI memory tags.

• 1 Digit BCD

• 2 Digit BCD

• 3 Digit BCD

• 5 Digit BCD

• 6 Digit BCD

• 7 Digit BCD

<PanelView ’e’ Tag Name> converted

to memory tag, as the "Bit Position"

data type is not supported.

If the data type of a PanelView ’e’ Remote I/O tag is bit

position but the address does not reference a single bit, the

tag is converted to an HMI memory tag.

<PanelView ’e’ Tag Name> converted

to memory tag, as its addresses

references an undefined rack.

If a PanelView ’e’ Remote I/O tag has an address with an

undefined rack, the tag is converted to an HMI memory tag.

<PanelView ’e’ Tag Name> converted

to memory tag, as its addresses is

invalid.

If a PanelView ’e’ Remote I/O tag does not have a valid I/O

address or block transfer address, the tag is converted to an

HMI memory tag.

Conversion Log Messages

Message Applies to this

PanelBuilder 1400e object

Description

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 159 160

No comments

Rockwell-automation Migrating PanelView Enhanced Terminal Applications User Manual Page 32