Rockwell-automation 1770-KF3 DH-485 Communication Interface User Manua User Manual download pdf (Page 30)

Configuring the KF3

Chapter 3

37

The advanced communication parameters are located in the Submenu.

When parameter 9, the Submenu entry parameter, is shown on the left

display, the Data display on the right will show dashes. Press the Data

button to enter the Submenu and display the submenu parameter numbers.

The number on the left will change from 9 to 0, and its decimal point will

light up, remaining lit as long as you are in the Submenu.

Figure 3.3

Submenu

Indicator

Communication

Parameter

Current

Setting

Submenu

Indicator

Important: Changing the default setting of these parameters can disrupt

operation of the network.

Once in the submenu, you change parameters and select parameters in

the same manner as in the main menu, using the View and Data buttons.

When the last submenu parameter is reached, press View to go back to the

first submenu parameter.

Press the Exit button alone to return to the main menu without saving

submenu changes. Press Exit and View simultaneously to save all changes

in both menus and return the module to run mode.

Table 3.C describes each advanced (submenu) communication parameter

and its valid settings. The numbers in parentheses are the factory default

values as they appear in the display.

Advanced Communication

Parameters

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 58 59

No comments

Rockwell-automation 1770-KF3 DH-485 Communication Interface User Manua User Manual Page 30