Rockwell-automation 20-750-PNET2P Profinet Dual Port Option Module User Manual Page 83
- Page / 100
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Rockwell Automation Publication 750COM-UM007A-EN-P - January 2013 83
Option Module Parameters Appendix B
Host Parameters
Parameter
No. Name and Description Details
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
[DL From Net 01]
[DL From Net 02]
[DL From Net 03]
[DL From Net 04]
[DL From Net 05]
[DL From Net 06]
[DL From Net 07]
[DL From Net 08]
[DL From Net 09]
[DL From Net 10]
[DL From Net 11]
[DL From Net 12]
[DL From Net 13]
[DL From Net 14]
[DL From Net 15]
[DL From Net 16]
Sets the port number and parameter number to
which the selected Datalinks should connect. Each
selected port/parameter will be written with data
received from the network. These are parameters
written by the controller (outputs from the
controller).
If setting the value manually, the parameter value
= (10000 * port number) + (destination parameter
number). For example, suppose you want to use
Host Parameter 01 - [DL From Net 01] to write to
Parameter 01 of an optional encoder module
plugged into drive Port 5. The value for Host
Parameter 01 - [DL From Net 01] would be
50001 [(10000 * 5) +1].
Default: 0
Default: 0
Default: 0
Default: 0
Default: 0
Default: 0
Default: 0
Default: 0
Default: 0
Default: 0
Default: 0
Default: 0
Default: 0
Default: 0
Default: 0
Default: 0
Minimum: 0
Maximum: 159999
Type: Read/Write
Reset Required: No
- User Manual 1
- Important User Information 2
- Summary of Changes 3
- Table of Contents 5
- Appendix C 7
- Logic Command/Status Words: 7
- PowerFlex 750-Series Drives 7
- Glossary 7
- Conventions Used in This 9
- Rockwell Automation 9
- Related Documentation 10
- Getting Started 11
- Features 12
- Understanding Parameter 13
- Compatible Products 13
- Required Equipment 13
- User-Supplied Equipment 14
- Safety Precautions 16
- Quick Start 17
- Installing the Option Module 19
- Setting the IP Address 20
- Selection Jumper 20
- Connecting the Option 21
- Module to the Drive 21
- Module to the Network 22
- Using MRP (Media 23
- Redundancy Protocol) for 23
- Ring Topology 23
- Applying Power 24
- and page 57 25
- Configuring the Option Module 29
- Disabled 0 30
- 0<<1 30
- 0 << 255 31
- Setting a Master-Slave 32
- Hierarchy (Optional) 32
- Enable Datalinks To Read Data 34
- Setting a Fault Action 35
- Setting Web Page Access 37
- 0<<2 38
- Restoring Option Module 39
- Parameters to Factory 39
- Defaults 39
- Viewing the Option Module 40
- Status Using Parameters 40
- Updating the Option 40
- Module Firmware 40
- Example Network 41
- Configure the Profinet 42
- Controller 42
- GSDML Installation 43
- Slave Configuration 44
- Using the I/O 47
- Understanding the Profinet 48
- Scanner I/O Image 48
- Using Logic Command/ 48
- Using Reference/Feedback 49
- Using Datalinks 50
- Acyclic Messaging 51
- Profinet Acyclic Messaging 52
- Example Messaging 52
- Troubleshooting 55
- PORT Status Indicator 56
- MOD Status Indicator 56
- NET A Status Indicator 57
- NET B Status Indicator 57
- Viewing Option Module 58
- Diagnostic Items 58
- Viewing and Clearing 62
- Enabling the Option Module 65
- Web Pages 65
- Viewing the Web Pages 65
- Process Display Pop-up 68
- Dialog Box 68
- Profinet Configuration Web 69
- Configure E-mail 70
- Notification Web Page 70
- 3. Click Save Changes 72
- Figure 12 72
- Device Information Pages 73
- PNET2P option module) 75
- Specifications 77
- Environmental 78
- Regulatory Compliance 78
- Option Module Parameters 79
- About Parameter Numbers 80
- How Parameters Are 80
- Organized 80
- Device Parameters 80
- Host Parameters 83
- 750-Series Drives 87
- Logic Status Word 88
- Rockwell Automation Support 100
- Documentation Feedback 100
Related products and manuals for Equipment Rockwell-automation 20-750-PNET2P Profinet Dual Port Option Module
Equipment Rockwell-automation 160-DN2 160-DN2 DeviceNet Communication Module FRN User Manual
(116 pages)
(116 pages)
Equipment Rockwell-automation 150 SMC-50 Soft Starter Safety Label Installation User Manual
(2 pages)
(2 pages)
(4 pages)
(4 pages)
Equipment Rockwell-automation 140U Q, M Frame CB Alarm Switch and Auxiliary Swit User Manual
(8 pages)
(8 pages)
© 2020, manymanuals.com. All rights reserved. | 8.071 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals