Rockwell-automation 440N SensaGuard 18 mm Plastic Barrel Installation User Manual download pdf (Page 7)

List of Recommended Safety Control Interfaces

GSR DI, GSR DIS, GSR SI, CR30, MSR126, MSR127, MSR131, MSR138, MSR211, MSR221, MSR121, MSR320, SmartGuard™,

1791DS/ES CompactBlock™ Guard Safety I/O, 1732DS/ES ArmorBlock Guard Safety I/O. Relay must have OSSD (light curtain) inputs.

Maintenance

Monthly

Check the correct operation of the switching circuit. Also check for signs of abuse or tampering. Inspect the switch casing for damage.

Repair

If there is any malfunction or damage, no attempts at repair should be made. The unit should be replaced before machine operation is

allowed.

Declaration of Conformity

This is to declare that the products shown in this document conform with the Essential Health and Safety Requirements (EHSRs) of the

European Machinery Directive. These products also conform to EN60947-5-3, EN ISO 14119, and have Third Party Approval.

For a comprehensive certificate please visit: www.ab.com/safety.

Check the machine is

isolated and stopped

whenever the interlocked

guard door is open.

IMPORTANT: After

installation and

commissioning, the

actuator, switch and switch

lid fixing screws should be

coated with tamper evident

varnish or similar compound.

1 2 3 4 5 6 7 8

No comments

Rockwell-automation 440N SensaGuard 18 mm Plastic Barrel Installation User Manual Page 7