Rockwell-automation 22-COMM-C ControlNet Adapter User Manual Page 106
- Page / 164
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
8-2 Troubleshooting
PORT Status Indicator
Status Cause Corrective Action
Off The adapter is not powered or
not properly connected to the
drive.
• Securely connect the adapter to the drive
using the Internal Interface (ribbon) cable.
• Apply power to the drive (or adapter if
mounted in a DSI External Comms Kit).
Flashing
Red
In Single mode, the adapter is
not receiving communication
from the drive.
In Multi-Drive mode, the adapter
is not receiving communication
from a drive, or a drive is not an
Allen-Bradley drive.
• Verify that the Operating Mode Jumper
(J7 in Figure 2.1
) is in the position
corresponding to the mode in which the
adapter is being used.
• Verify the setting for Parameter 12 - [DSI
I/O Cfg].
• Verify that cables are securely connected
and not damaged. Replace cables if
necessary.
• Cycle power to the drive (or adapter if
mounted in a DSI External Comms Kit).
• Use Allen-Bradley PowerFlex 4/40/400
drives.
Flashing
Green
The adapter is establishing
communications with the drive.
No action required. This status indicator will
turn solid green or flashing red.
Solid
Green
The adapter is properly
connected and is
communicating with the drive.
No action required.
Orange The drive is not an
Allen-Bradley drive.
Use an Allen-Bradley PowerFlex 4/40/400
drive.
- ControlNet 1
- Important User Information 2
- Summary of Changes 3
- Table of Contents 5
- Chapter 8 Troubleshooting 6
- Appendix A Specifications 6
- Appendix B Adapter Parameters 6
- About This Manual 9
- Rockwell Automation Support 11
- P-4 About This Manual 12
- Getting Started 13
- Features 14
- Compatible Products 15
- Required Equipment 15
- Safety Precautions 16
- Quick Start 17
- Modes of Operation 18
- Installing the Adapter 19
- Node Address 20
- Switches 20
- Operating 20
- Mode Jumper 20
- Item Description 22
- DSI connector 22
- ControlNet cable 22
- Installing the Adapter 2-5 23
- Applying Power 25
- 2-8 Installing the Adapter 26
- Configuring the Adapter 27
- Using the HIM 28
- Setting the Node Address 29
- Setting the I/O Configuration 29
- Setting a Fault Action 30
- To change the fault action 31
- Resetting the Adapter 32
- Configuring the Adapter 3-7 33
- 3-8 Configuring the Adapter 34
- Configuring the I/O 35
- Configuring the I/O 4-7 41
- 4-10 Configuring the I/O 44
- PLC-5 Example 46
- Using the I/O 51
- Understanding the I/O Image 52
- Using Logic Command/Status 53
- Using Reference/Feedback 53
- ControlLogix Example 55
- 5-6 Using the I/O 56
- Using the I/O 5-7 57
- Using the I/O 5-9 59
- Figure 6.5 59
- 5-10 Using the I/O 60
- Using Explicit Messaging 61
- Ladder Logic Program 65
- Using Multi-Drive Mode 69
- 1 drive per node 70
- System Wiring 72
- 7-6 Using Multi-Drive Mode 74
- Adapter Settings 76
- Drive Settings 76
- ControlLogix I/O Example 77
- 7-10 Using Multi-Drive Mode 78
- 7-12 Using Multi-Drive Mode 80
- Using Multi-Drive Mode 7-13 81
- 7-14 Using Multi-Drive Mode 82
- Using Multi-Drive Mode 7-15 83
- 7-16 Using Multi-Drive Mode 84
- Using Multi-Drive Mode 7-17 85
- 7-18 Using Multi-Drive Mode 86
- Using Multi-Drive Mode 7-19 87
- 7-20 Using Multi-Drive Mode 88
- Using Multi-Drive Mode 7-21 89
- PLC-5 I/O Example 92
- Using Multi-Drive Mode 7-25 93
- 7-26 Using Multi-Drive Mode 94
- Using Multi-Drive Mode 7-27 95
- 7-28 Using Multi-Drive Mode 96
- Using Multi-Drive Mode 7-29 97
- 7-30 Using Multi-Drive Mode 98
- Using Multi-Drive Mode 7-31 99
- 7-32 Using Multi-Drive Mode 100
- Using Multi-Drive Mode 7-33 101
- 7-34 Using Multi-Drive Mode 102
- Using Multi-Drive Mode 7-35 103
- Additional Information 104
- Troubleshooting 105
- PORT Status Indicator 106
- MOD Status Indicator 107
- 8-4 Troubleshooting 108
- Troubleshooting 8-5 109
- (version 3.01 or higher) 109
- 8-6 Troubleshooting 110
- Viewing and Clearing Events 111
- 8-8 Troubleshooting 112
- Specifications 113
- Environmental 114
- Regulatory Compliance 114
- Adapter Parameters 115
- B-2 Adapter Parameters 116
- Adapter Parameters B-3 117
- B-4 Adapter Parameters 118
- ControlNet Objects 119
- Identity Object 120
- Identity Object (Continued) 121
- Assembly Object 122
- Assembly Object (Continued) 123
- Register Object 124
- Register Object (Continued) 125
- Parameter Object 127
- Parameter Object (Continued) 128
- Class Code 130
- Services 130
- Instances 130
- Class Attributes 130
- Instance Attributes 131
- (Continued) 131
- PCCC Object 132
- PCCC Object (Continued) 133
- DSI Device Object 138
- DSI Device Object (Continued) 139
- DSI Parameter Object 141
- Descriptor Attributes 143
- Formulas for Converting 144
- Common Services 144
- Object Specific Services 144
- DSI Fault Object 145
- DSI Fault Object (Continued) 146
- DSI Diagnostic Object 147
- Logic Command/Status Words 149
- Logic Status Word 150
- Glossary 151
- D Data Rate 152
- F Fault Action 153
- I I/O Data 153
- L Logic Command/Logic Status 154
- N Node Address 154
- R Reference/Feedback 154
- S Scanner 155
- Z Zero Data 155
- G-6 Glossary 156
Related products and manuals for Equipment Rockwell-automation 22-COMM-C ControlNet Adapter
Equipment Rockwell-automation 20L PowerFlex 700L Frame 2 Common Mode Choke Kit User Manual
(4 pages)
(4 pages)
Equipment Rockwell-automation 20P PowerFlex DC Drive - Frame C AC Line Snubber B User Manual
(16 pages)
(16 pages)
Equipment Rockwell-automation 20P PowerFlex DC Drive - Frame B Pulse Transformer User Manual
(4 pages)
(4 pages)
Equipment Rockwell-automation 20P PowerFlex DC Drive - Frame C Bimetal Thermosta User Manual
(16 pages)
(16 pages)
Equipment Rockwell-automation 140A Manual Motor Starter / Circuit Breaker Instru User Manual
(4 pages)
(4 pages)
Equipment Rockwell-automation 20P PowerFlex DC Drive - Frame D Snubber Resistors User Manual
(10 pages)
(10 pages)
Equipment Rockwell-automation 20P PowerFlex DC Drive - Frame D Overvoltage Clipp User Manual
(4 pages)
(4 pages)
Equipment Rockwell-automation 20P PowerFlex DC Drive - Frame A Field SCR/Dual Di User Manual
(14 pages)
(14 pages)
Equipment Rockwell-automation 20L-LL PowerFlex 700L Liquid-to-Liquid Heat Exchan User Manual
(6 pages)
(6 pages)
Equipment Rockwell-automation 23P PowerFlex DC Stand-Alone Regulator (SAR) Disch User Manual
(10 pages)
(10 pages)
Equipment Rockwell-automation 42GNC_NF_NL_NP_NR_NU SmartSight DeviceNet PHOTOSWI User Manual
(4 pages)
(4 pages)
© 2020, manymanuals.com. All rights reserved. | 1.689 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals