Rockwell-automation 1747-KE,D17476.12 DH-485/RS-232C Interface Module User Manual Page 117
- Page / 139
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
1 Publication 1747-UM005B-EN-P - March 2006
Appendix
A
Specifications
This appendix contains information regarding hardware specifications
for the DH-485/RS-232C Interface Module.
Hardware Specifications
The module hardware specifications are listed in the following tables.
Hardware Specifications
Attribute Value
Power Supply Loading at
5V dc
0.150 A (module only)
0.150 A (module with link coupler)
Power Supply Loading at
24V dc
0.070 A (module only)
(2)(3)
(2)
If a 1747-AIC link coupler is connected to the 1747-KE module with a 1747-C11 cable, the link coupler draws
its power (0.085 A @ 24V dc) through the module. Add this to the current listed for the link coupler
requirements.
(3)
If a 1747-AIC link coupler is connected to the 1747-KE module with a 1747-C13 cable, then the power for the
link coupler comes from either an SLC 500 controller or an external power supply.
0.125 A (module with link coupler)
Noise Immunity NEMA Standard ICS 2-230
Vibration Displacement: 0.015 in., peak-to-peak at 5...57 Hz
Acceleration: 2.5 g at 57...2000 Hz
Shock (operating) 30 g
Port Isolation
(1)
CONFIG Port
DF1 Port
CONFIG and DF1 Port
(1)
Port DH485 is not isolated.
500V ac
500V ac
500V ac
Ambient Temperature
Rating
Operating: 0...+60 °C (+32...+140 °F)
Storage: -40...+85 °C (-40...+185 °F)
Humidity 5...95% without condensation
Clock/Calendar Accuracy
±1 minute/month at 25 °C (77 °F)
+0, -6 minute/month at 60 °C (140 °F)
- DH-485/RS-232C 1
- Interface Module 1
- Important User Information 2
- Summary of Changes 3
- 2 Summary of Changes 4
- Table of Contents 5
- Table of Contents iii 7
- Who Should Use This 9
- Purpose of This Manual 9
- Terms and Abbreviations 10
- Conventions Used in This 11
- 4 Preface 12
- Features 14
- LED Indicators 15
- Jumper Placement 16
- Use a Modem with Your 17
- Use DF1 Protocol and Your 17
- Typical Configurations 18
- Half-duplex (Local Mode) 20
- Half-duplex (Remote Mode) 21
- Group 01Group 00 21
- Quick Start 23
- Procedures 24
- Configure the Module 25
- Start-up the Module 25
- 2-4 Quick Start 26
- DF1 Communication 27
- Half-duplex DF1 Protocol 28
- Local Mode 29
- Remote Mode 30
- 011 11101 34
- Slave-to-slave Communication 35
- Communicate with DH-485 36
- Communicate with a 37
- European Union Directives 39
- Compliance 39
- Choose the Module’s 40
- Functionality 40
- Series B Functionality 41
- Set the Module’s Mode 42
- Verify CONFIG Port 43
- Configuration 43
- Verify DF1 Port 44
- Install Your Module in an 45
- Open Slot 45
- Connect Cable to CONFIG or 46
- DF1 Ports 46
- 47
- Connect Cable to the 49
- DH-485 Port 49
- Configure Your SLC Chassis 51
- Configure the DF1 Driver 52
- Configure Your Module 53
- Complete the Installation of 53
- Your Module 53
- Terminal 55
- ASCII Terminal 56
- Module Configuration with 57
- Top Level Setup Menu 58
- CONFIG Port Menu 59
- DF1 Port Menu 60
- DH-485 Port Menu 61
- DF1 Protocol Menu 62
- RAM is lost 63
- DF1 Half-duplex Setup Menu 64
- Display Parameters Menu 66
- Configure the Interface 68
- Module from the SLC 68
- Processor 68
- Place the Module into 70
- Software Run Mode from 70
- SLC Processor 70
- Configuration from the SLC 71
- Read the Module’s 71
- Examine the SLC 72
- Processor’s Status Word 72
- Build the DF1 Configuration 74
- DF1 Port Setup Parameters 75
- Build the DH-485 78
- Configuration Packet 78
- Build the Modem Init String 79
- Configuration Packets 79
- Use the Real Time Clock 82
- Establish a Data Echo 83
- Between the Interface 83
- Module and the SLC 83
- Reset the Interface Module 84
- Interpret the LED Indicators 85
- Input Image Description 86
- Status Codes from the 87
- Module to the Processor 87
- SLC Fault Code 87
- Application Examples 89
- Parameter Settings 90
- Configuration Results 91
- Supplementary Example 97
- Using the Backplane 97
- Data Echo Feature 99
- Configuration Data Table 101
- RSLogix Software to SLC 102
- Network via Modem 102
- Modify an Existing Driver 105
- Add a New Driver 105
- IMPORTANT 109
- Specifications 117
- Certification 118
- Port Isolation 118
- RS-423 jumper settings 119
- A-4 Specifications 120
- Appendix 121
- Overview 121
- SLC 500 Processor 122
- Use the PLC-5 Message 123
- Instruction with Word 123
- Instruction with Byte 124
- Disposal 125
- Battery Location 126
- Battery Handling 127
- Three or More Batteries 128
- Battery Disposal 129
- DF1 Full-duplex 132
- DF1 Half-duplex 133
- Numerics 135
- 2 Index 136
- Index 3 137
- Rockwell Automation 139
Related products and manuals for Equipment Rockwell-automation 1747-KE,D17476.12 DH-485/RS-232C Interface Module
Equipment Rockwell-automation 1794-IF8IH FLEX I/O 8 Isolated Input HART Analog M User Manual
(28 pages)
(28 pages)
Equipment Rockwell-automation 1746-NI16V SLC 500 Analog Input Modules User Manua User Manual
(120 pages)
(120 pages)
Equipment Rockwell-automation 1738-OE2VM12 ArmorPoint 24V dc Analog Output Modul User Manual
(16 pages)
(16 pages)
Equipment Rockwell-automation 1771-SDN DeviceNet Scanner Module Installation Ins User Manual
(40 pages)
(40 pages)
Equipment Rockwell-automation 1771-OBD Series C INSTL INSTR DC(10-60V) OUTPUT User Manual
(20 pages)
(20 pages)
Equipment Rockwell-automation 1734-FPD, Series B POINT I/O Field Potential Distr User Manual
(16 pages)
(16 pages)
Equipment Rockwell-automation 1771-IND series C INSTL INSTR AC/DC INPUT MODULE User Manual
(12 pages)
(12 pages)
Equipment Rockwell-automation 1734D-IB8XOB8 POINT I/O Installation Instructions User Manual
(12 pages)
(12 pages)
Equipment Rockwell-automation 1771-N SERIES High Resolution Analog Module User M User Manual
(188 pages)
(188 pages)
Equipment Rockwell-automation 1792D-8BIO8E ArmorBlock MaXum 8 Input/8 Output Mod User Manual
(16 pages)
(16 pages)
Equipment Rockwell-automation Logix5000 Controllers Major, Minor, and I/O Faults User Manual
(53 pages)
(53 pages)
Equipment Rockwell-automation 1756-HIST2G FactoryTalk Historian ME 2.2 Installat User Manual
(28 pages)
(28 pages)
Equipment Rockwell-automation 1769-IQ6XOW4 Compact Combination 24V dc Sink/Sourc User Manual
(20 pages)
(20 pages)
Equipment Rockwell-automation 1746-NO8V SLC 500 8-Point Analog Output Module/ Us User Manual
(74 pages)
(74 pages)
© 2020, manymanuals.com. All rights reserved. | 1.606 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals