Rockwell-automation 20D PowerFlex 700S Phase II Drive Frames 1...6 Ins User Manual download pdf (Page 45)

Rockwell Automation Publication 20D-IN024C-EN-P - July 2013 45

PowerFlex 700S Adjustable Frequency AC Drive - Phase II Control

Circuit Breakers

The “non-” listings in the following tables include inverse time circuit breakers,

instantaneous trip circuit breakers (motor circuit protectors) and 140M self-

protected combination motor controllers. If one of these is chosen as the desired

protection method, the following requirements apply:

• IEC – Both types of circuit breakers and 140M self-protected

combination motor controllers are acceptable for IEC installations.

• UL - Only inverse time circuit breakers and the specified 140M self-

protected combination motor controllers are acceptable for UL

installations.

(1) Typical designations include, but may not be limited to the following; Parts 1 & 2: AC, AD, BC,

BD, CD, DD, ED, EFS, EF, FF, FG, GF, GG, GH.

Table 12 - 208 Volt AC Input Frames 1…6 Drive Protection Devices

Drive

Cat. No.

Frame

kW Rating Input

Ratings

Dual Element

Time Delay Fuse

Non-Time Delay

Fuse

Circuit

Breaker

(3)

Motor

Circuit

Protector

(5)

140M Motor Starter with Adjustable Current Range

(6)(7)

ND HD Amps kVA Min

(1)

Max

(2)

Min

(1)

Max

(2)

Max

(4)

Max

(5)

Available Cat. No.s

(8)

Minimum Enclosure

Volume (in.

)

(9)

20DB4P2 1 0.75 0.55 3.7 1.3 6 10 6 17.5 15 7 M-C2E-B63 M-D8E-B63 – 7269

20DB6P8 1 1.5 1.1 6.8 2.4 10 15 10 30 30 15 M-C2E-C10 M-D8E-C10 M-F8E-C10 7269

20DB9P6 1 2.2 1.5 9.5 3.4 12 20 12 40 40 15 M-C2E-C16 M-D8E-C16 M-F8E-C16 7269

20DB015 1 4.0 3.0 15.7 5.7 20 35 20 70 70 30 M-C2E-C20 M-D8E-C20 M-F8E-C20 7269

20DB022 1 5.5 4.0 23.0 8.3 30 50 30 100 100 30 – M-D8E-C25 M-F8E-C25 7269

20DB028 2 7.5 5.5 29.6 10.7 40 70 40 125 125 50 – – M-F8E-C32 7269

20DB042 3 11 7.5 44.5 16.0 60 100 60 175 175 70 – – M-F8E-C45 13630

20DB052 3 15 11 51.5 18.6 80 125 80 200 200 100 – – – –

20DB070 4 18.5 15 72 25.9 90 175 90 300 300 100 – – – –

20DB080 4 22 18.5 84.7 30.5 110 200 110 350 350 150 – – – –

20DB104 5 30 – 113 40.7 150 250 150 475 350 150 – – – –

– 22 84.7 30.5 125 200 125 350 300 150 – – – –

20DB130 5 37 – 141 44.1 175 275 175 500 375 250 – – – –

– 30 113 35.3 125 225 125 400 300 150 – – – –

20DB154 6 45 – 167 60.1 225 350 225 500 500 250 – – – –

– 37 141 50.9 200 300 200 500 450 250 – – – –

20DB192 6 55 – 208 75.0 300 450 300 600 600 400 – – – –

– 45 167 60.1 225 350 225 500 500 250 – – – –

20DB260 6 66 – 255 96.7 300 575 300 750 750 400 – – – –

– 55 199 71.7 225 450 225 600 600 400 – – – –

(1) Minimum protection device size is the lowest rated device that supplies maximum protection without nuisance tripping.

(2) Maximum protection device size is the highest rated device that supplies drive protection. For US NEC, minimum size is 125% of motor FLA. Ratings shown are maximum.

(3) Circuit Breaker - inverse time breaker. For US NEC, minimum size is 125% of motor FLA. Ratings shown are maximum.

(4) Maximum allowable rating by US NEC. Exact size must be chosen for each installation.

(5) Motor Circuit Protector - instantaneous trip circuit breaker. For US NEC minimum size is 125% of motor/drive FLA. Ratings shown are suggested. Instantaneous trip settings must be set to US NEC code. Not to exceed 1300% FLA.

(6) Bulletin 140M with adjustable current range should have the current trip set to the minimum range that the device will not trip.

(7) Manual Self-Protected (Type E) Combination Motor Controller, UL listed for 208 Wye or Delta, 240 Wye or Delta, 480Y/277 or 600Y/ 347. Not UL listed for use on 480V or 600V Delta/Delta, corner ground, or high-resistance ground

systems.

(8) The AIC ratings of the Bulletin 140M Motor Protector Circuit Breakers may vary. See Bulletin 140M Motor Protection Circuit Breakers Application Ratings

(9) When using a Manual Self-Protected (Type E) Combination Motor Controller, the drive must be installed in a ventilated or non-ventilated enclosure with the minimum volume specified in this column. Application specific thermal

considerations may require a larger enclosure.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 79 80

Comments to this Manuals

No comments

Rockwell-automation 20D PowerFlex 700S Phase II Drive Frames 1...6 Ins User Manual Page 45

Comments to this Manuals

Related products and manuals for Equipment Rockwell-automation 20D PowerFlex 700S Phase II Drive Frames 1...6 Ins