Rockwell-automation 2705 RediSTATION Operator Interface User Manual User Manual download pdf (Page 23)

Publication 2705-UM001A-EN-P

Installation and Mounting 2-7

Mounting the RediSTATION

The RediSTATION mounts on a flat surface. The back of the unit has

4 holes that accept a 10-32 (5mm) screw. To maintain a watertight

seal, use sealing grommets with screws. The screw length must be 1/2

inch (12.7 mm) plus the depth of the material into which the screw is

mounted. The head of the screws must be 3/8 inch or less to fit in the

sealed mounting holes.

For proper grounding, mount the enclosure to a grounded metal

plate. Scrape the paint around the screw holes of the enclosure and

plate to ensure good metal-to-metal contact.

Allow a clearance of at least 3 inches (76.2 mm) at the top of the

enclosure for connecting the DeviceNet cable.

6.25 inch

(158.7 mm)

Allow 3-inch clearance

for DeviceNet cable

4 Holes

.203 inch

(5.2 mm) diameter

3.00 inch

(76.2 mm)

RediSTATION

Back Side

10-32 (5mm) screws

Sealing Grommets

Heads of screws must be smaller

than 3/8 inch to fit inside mounting

Sealed Mounting Hole

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 63 64

No comments

Rockwell-automation 2705 RediSTATION Operator Interface User Manual User Manual Page 23