Rockwell-automation 284A ArmorStart with ArmorPoint Backplane - Gettin User Manual download pdf (Page 16)

Publication 284A-QS001C-EN-P - July 2006

LED Status Indication The LED Status Indication provides 4 status LEDs and a Reset button. The

LEDs provide status indication for the following:

• POWER LED

The LED is illuminated solid green when control power is present and

with the proper polarity

•RUN LED

This LED is illuminated solid green when a start command and control

power are present

• NETWORK LED

This bi-color (red/green) LED indicates the status of the

communication link

• FAULT LED

Indicates Controller Fault (trip) condition

The “Reset Button” as a local trip reset.

Figure 10 LED Status Indication and Reset

ArmorStart with ArmorPoint ArmorStart for the ArmorPoint Backplane

The Bulletin 284A ArmorStart Distributed Motor Controller allows

connectivity to the ArmorPoint backplane. The ArmorPoint I/O system can

communicate using DeviceNet™, ControlNet™, or EtherNet

communication protocols. In addition to the other network communication

protocols; the ArmorPoint Distributed I/O products allow the I/O capability

to be expanded beyond the standard two outputs. Two dual-key relay output

connectors are provided standard. The outputs are sourced from control

voltage power (A1, A2). LED status indication is also provided, as standard

with the ArmorPoint. When using ArmorPoint, a maximum of two

ArmorStart Distributed Motor Controllers can be connected to the

ArmorPoint Distributed I/O products.

ArmorStart to ArmorPoint Connectivity

Figure 11 Connectivity Diagram for one ArmorStart Distributed Motor Controller

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

No comments

Rockwell-automation 284A ArmorStart with ArmorPoint Backplane - Gettin User Manual Page 16