Rockwell-automation 5370-CVIM2 Module User Manual download pdf (Page 40)

100

101

Chapter

3–1

Image Acquisition Parameters

This chapter discusses the details of selecting the appropriate image

acquisition parameters in preparation for configuring the inspection tools.

NOTE: During the inspection configuration process, you would normally

access the image acquisition parameters through the

button in the

Configuration Editor panel (see Chapter 4, Inspection Configuration; page

4–7). However, you can also access these parameters from the main menu

bar through the Editors menu, as described in this chapter.

When you pick Acquisition in the Editors menu, the Acquisition Editor

panel appears, as shown by the example in Figure 3.1.

Figure 3.1 Example: Selecting the Acquisition Editor Panel

Main menu

bar

The Acquisition Editor panel provides access to all of the parameters and

settings that the system uses to acquire an image for an inspection. The panel

contains two scrolling lists and several buttons, which are described briefly

as follows:

• Camera 1 – 6 –– The through buttons access the

corresponding Camera setup panels, from which you can perform focus

adjustments, light reference adjustments, and other related functions.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 563 564

Comments to this Manuals

No comments

Rockwell-automation 5370-CVIM2 Module User Manual Page 40

Comments to this Manuals

Related products and manuals for Equipment Rockwell-automation 5370-CVIM2 Module