Rockwell-automation Migrating PanelView Enhanced Terminal Applications User Manual download pdf (Page 64)

64 Publication 2711P-QS001A-EN-P - October 2007

Chapter 6 Review Unsupported Features and Implement Workarounds for Migration Issues

Replacing the Numeric

Data Display Object List

In PanelBuilder 1400e software, the numeric data display object list

displays a list of PLC values. The minimum width of the list depends

on the range of values you want to show. This object is retentive

because the scrolling list that controls it is retentive.

FactoryTalk View ME software provides the numeric display object as

an alternative to the numeric data display object list. Because the

numeric display only allows you to assign a single tag to the object,

you will have to create multiple displays and group them together. For

example, if the numeric data display object list has four visible PLC

values, then you will need to create four numeric displays and group

them together to achieve the same look.

Create Numeric Displays

Follow these steps to create numeric displays.

1. Open the display with the

piloted control list selector.

2. Select Objects>Numeric and

String>Numeric Display and

draw the object.

• The PanelBuilder 1400e

numeric data display object

list lets you assign a tag for

each PLC value you want to

display.

• The FactoryTalk View ME

numeric display lets you

assign only a single

indicator tag to the object.

You will need to create as

many numeric displays as

there are visible PLC values

in the original numeric data

display object list.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 159 160

No comments

Rockwell-automation Migrating PanelView Enhanced Terminal Applications User Manual Page 64