Rockwell-automation 2711PC-xxxx PanelView Plus Compact User Manual User Manual download pdf (Page 78)

78 Publication 2711PC-UM001A-EN-P - March 2009

Chapter 5 Installing and Replacing Components

Battery Removal for the 400 and 600 Terminals

The lithium battery in the 400 and 600 is non-replaceable and should

be removed only at the end of product life.

Follow these steps to remove the battery in the 400 and 600 terminals.

1. Disconnect power from the terminal.

2. Place the terminal, display side down, on a flat stable surface.

3. Unlatch the eight retaining tabs (two on each side) on the back

cover and remove cover.

4. Locate the yellow battery on the logic board.

5. Remove the battery.

This product contains a hermetically sealed lithium battery

which is permanently connected and should be removed only by

trained professionals.

At the end of its life, the battery contained in this product

should be collected separately from any unsorted municipal

waste.

The collection and recycling of batteries helps protect the

environment and contributes to the conservation of natural

resources as valuable materials are recovered.

Retaining Tabs

Battery

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 131 132

Comments to this Manuals

No comments