Rockwell-automation 2711PC-xxxx PanelView Plus Compact User Manual User Manual download pdf (Page 89)

Publication 2711PC-UM001A-EN-P - March 2009 89

Terminal Connections Chapter 6

USB Ports

The 1000 terminals have two USB ports. The 400 and 600 terminals

have one USB port. The terminals support standard USB keyboard

and mouse devices (HID devices) with native device drivers. They

also support some USB printers that have Printer Control Language

(PCL) capabilities. A vendor specific Windows CE driver is required

for all other USB devices.

See Appendix B

for a list of compatible USB devices.

Plug the USB device into either one of the two USB ports on the

1000 terminals.

USB Connector Pinout

If a USB hub is connected to the terminal, an externally powered USB

hub is recommended. Before attaching devices to a USB hub, check

that the power adapter is connected and powered on.

Pin Signal

1 USBVCC

2 USBD-

3 USBD+

4 USB-GND

WARNING

Do not connect or disconnect the communication cable with

power applied to the terminal, or the serial device on the other

end of the cable. An electrical arc could cause an explosion in

hazardous location installations. Be sure that power is removed

or the area is nonhazardous before proceeding.

WARNING

USB devices not powered by the USB port must be within the

same enclosure and connected to a ground system common

with the terminal, or the USB devices must be used with a USB

hub that provides galvanic isolation.

4

3

2

1

4

3

2

1

1000 USB Ports

4

3

2

1

400 and 600 USB Port

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 131 132

Comments to this Manuals

No comments