Rockwell-automation 7000 PowerFlex HMI Offering with Enhanced Function User Manual download pdf (Page 35)

Rockwell Automation Publication 7000-UM201B-EN-P - June 2013 33

Drive Terminal Application Chapter 4

3. Enter the PIN (password) for the given level.

The PIN can be entered directly in the ‘Password’ input box or via the Soft

Keypad. If the correct PIN is entered, the “Current Access” will change to

the Access level requested.

4. Press OK.

Change the Access Password

The Access Filter dialog can also change the PIN associated with the Access

Level. PINs are stored within the drive, not the terminal application.

You must gain access to the PIN level you wish to change.

To change the PIN value:

1. Click Change.

2. Enter the new password into the field or via the Soft Keypad.

The new PIN must be re-entered into the next data entry field.

A status message indicates if the operation was successful.

Change the ReadWrite Filter

All parameters can be read, however only some can be written to.

To change the filter that is active:

• Touch or click the desired radio button (Figure 29

) and press OK.

Figure 29 - Parameter Filter

TIP

Pressing the Logout push button will return the access level to the default

Access level at which no parameters can be modified.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 89 90

No comments

Rockwell-automation 7000 PowerFlex HMI Offering with Enhanced Function User Manual Page 35